$68.53
$135
MODEL E15HTSL MODEL YEAR 2018 SKU E15HTSL WEIGHT 187.0 lb MANUFACTURER Evinrude COUNTRY OF MANUFACTURE United States HORSEPOWER 15hp SHAFT LENGTH 20″ (Long) STEERING Tiller STARTING Electric and Rope TRIM & TILT High Speed Power Tilt FUEL DELIVERY E-TEC Direct Injection with stratified low RPM combustion mode FUEL TANK External CYLINDER(S) 2 DISPLACEMENT 577 cc (35.2 cubic inches) BORE AND STROKE 76 mm x 64 mm (2.992 x 2.5 inches) FULL THROTTLE RPM RANGE 5,000-5,500 RPM VALVES PER CYLINDER 2 FUEL TYPE Unleaded Gasoline (87 octane) OIL TYPE Evinrude / Johnson XD-100 Oil OIL CAPACITY 1.7 qt (1.6 L) LUBRICATION Multi-Point Targeted Oiling ALTERNATOR 56 Amps Total / 15 Amps Net Dedicated COOLING SYSTEM Water Cooled SALTWATER RATED Yes GEAR RATIO 2.15:1 GEAR SHIFT Forward, Neutral, Reverse 1 X Outboard Motor 1 X Outboard Tiller Handle ( The size will be given depending on the type of outboard you buy ) 1 X Fuel Tank ( The size will be given depending on the type of outboard you buy ) 1 X Quick Connect Fuel Line tilt switch 1 x Teleflex SL3 Throttle control Top or side Mount Free Installation Universal Cables 1 X Outboard Warranty Card from manufacturer Valid 3-5 Years Depending on outboard type 1 X Standart Aluminum Propeller Depending on outboard Brands , type & Horse power. 1 X Trim limiter 3 X Gall Free Oil Depending on outboard Brands Yamalube, Honda Marine Oil, Mercury Premium Oil 1 X Stainless Outboard Anti-Theft 1 X Book Owner’s Manual Guide from manufacturer 1 X Ebook Installation Guide & And how to take care of the engine properly. 3 X Cable Protection System Length 800mm Controls, Propeller, Battery, Fuel Tank, Line, and Stand are Included. The motor has been inspected and is ready to mount and run. Freight Shipping is available from New Castle, Delaware, , USA. Please message us for a quote. For a freight quote, please email at
[email protected] and provide the following information: Country Zip code Commercial (with a loading dock) or residential delivery Liftgate service on truck required or not NOTE – Please be sure to check all shipments for any potential damage during transit. It is the sole responsibility of the receiving party to fully inspect the product at the time of delivery for any potential damage. We recommend removing any protective wrapping to fully inspect the product before the driver leaves. If damage did occur during transit, all damage must be noted on the Bill of Lading in detail and SIGNED BY THE DRIVER. A copy of the Bill of Lading will need to be emailed or mailed to us in order for a damage claim to be filed with the trucking company on our customers’ behalf. When possible, please photograph the damaged product on the truck and off the truck for evidence that will assist with a product damage claim. The damaged product must be held in the customer’s possession up to 2 months. The shipping company has the right to inspect and/or claim the product if a damage claim is filed and/or paid by them.
