Emerson EZ1080 Series EZ1080-18-08-010 High-Precision Shaft Vibration Probe

Emerson EZ1080-18-08-010 | 8mm Eddy Current SensorThe EZ1080-18-08-010 from Emerson is a non-contact 8mm Eddy Current Sensor engineered for accurate monitoring of shaft movement in turbines, compressors, gearboxes, pumps, and fans. It provides fast response, linear accuracy, and stable output under extreme industrial conditions.Technical HighlightsBrand: EmersonModel: EZ1080-18-08-010Linear Range: 2 mm (80 mils)Initial Air Gap: 0.5 mmScale Factor: API 7.87 V/mm ±5% | ISO 8 V/mm ±5%Linearity: ±0.025 mm across 0–45°COperating Temperature: -35°C to 180°CCable Temperature: -35°C to 150°CPressure Resistance: 10,000 hPa (145 psi) at 120°CMaterial: PEEK tip, stainless steel case, FEP cable, nickel-plated brass connectorWeight: About 100 g with 1m cableProtection Class: IP67 / optional IP68Safety: SIL 2 Capable (IEC 61508:2010)Approvals: ATEX, IECEx, UL, CSA, CCC, KTL, CML JapanWarranty: 12 Months factory warrantySuffix Structure OverviewModel: EZ1080-18-08-010Series: EZ1080 (8mm Eddy Current Sensor)Thread: M10x1Armored Cable: NoCase Length (-18): 180 mmUnthreaded Length (08): 80 mmCable Length (010): 1.0 mPerformance AdvantagesDelivers accurate shaft displacement and vibration measurement up to 2 mm.Ensures consistent output under high vibration and temperature stress.Fast response enables precise monitoring in turbine and compressor systems.Supports intrinsic safety and increased safety applications with certified converters.Ideal for high-reliability use in steam, gas, and hydro turbines.Installation NotesInstall perpendicular to shaft surface with 0.5 mm initial gap.Ensure the target is clean and made of ferromagnetic steel (AISI 4140 or equivalent).Keep sensor cable away from high-voltage lines to avoid interference.Do not overtighten during mounting; protect the PEEK tip from impact.Verify converter compatibility and area classification before commissioning.Shipping & Packaging1 × Emerson EZ1080-18-08-010 Sensor (1m cable)1 × Basic installation manual1 × Product label with serial identificationShipping options: FedEx, UPS, DHLCertifications & ComplianceATEX, IECEx, UL, CSA, CCC, PESO India, KTL Korea, and CML Japan approved.Temperature classes: T6 (-35°C–55°C), T4 (-35°C–130°C), T2 (-35°C–200°C).Optional DOCTEST confirms pressure-seal integrity for critical applications.FAQQ: What is the benefit of an 80 mm unthreaded section? A: It allows deeper insertion for better alignment in confined mounting spaces.Q: Can this sensor handle continuous vibration? A: Yes, it maintains accuracy under high-frequency shaft vibration and rotation.Q: What cable type does it use? A: The FEP cable provides high flexibility and temperature resistance up to 150°C.Q: Is it suitable for marine environments? A: Yes, it complies with DNV GL marine classification standards for offshore units.Q: How do I verify proper calibration? A: Check output voltage using a compatible converter; use API or ISO scaling.Key Selling PointsHigh precision ±0.025 mm linearityRobust build for high-temperature machineryCertified for hazardous and marine applicationsFast installation with M10x1 thread and 1m cableReliable global support and 12-month warrantyContact & SupportEmail: [email protected]: 86 158 8020 0923Original SourcePartners: PLCDCS HUB Limited, PLC Pioneer LimitedCopyright © 2025 World of PLC Limited. All rights reserved.