Description The 4 outlets give you plenty of options to run hot air ducting to suit your installation and the integrated 10L stainless steel tank can operate on water heating only when in ‘summer’ mode. When operating from gas and electricity in mixed mode, electricity is prioritised to conserve gas, and the water tank can be heated to 60°C in as little as 23 minutes in summer mode. The Combi 4E is supplied with Truma’s iNet X smart control panel with a 4.3″ colour touch screen. This next generation panel has a sophisticated user interface coupled with intuitive navigation and step-by-step trouble shooting. It can be used to control other compatible devices and is internet-ready for remote control and monitoring and updates via the iNet X mobile app. Note: Hot air ducting, air outlet nuts, air outlets and other accessories for Truma combi heaters must be purchased separately – click here to view the full range. Features Water and space heating in a single, compact device Saves weight and space 6kW max. output (adjustable) Gas, electric & mixed operation Integrated 10L stainless steel water tank Summer mode – water heating only Warm air distribution via four outlets Separate room temperature sensor Heating available either when on-site or off-grid Prioritises electric when grid power available iNet X control panel with 4.3″ touch screen iNet X control panel The iNet X control panel is the heart of Truma’s iNet X system and the first step towards a smart campervan, motorhome or caravan. Its intuitive menu navigation and touch-screen operation make controlling your heating system a breeze, and internet connectivity allows for remote operation and monitoring plus software updates and new features. The panel can also be used as a central operating system for the control of compatible Truma products and other devices, giving you complete climate control. 4.3″ colour touch screen Sophisticated menu and user interface Intuitive navigation and system control Clear diagnostics & error messaging Mobile networked for remote operation via the iNet X app Software updates and enhancements via the iNet X app Central control of multiple devices with one operating system Kit Contents Truma Combi 6E water & blown-air heater Truma iNet X control panel RJ45 connection cable for control panel Combustion air intake & exhaust ducting Intake/exhaust side wall cowl Black trim for side wall cowl John Guest (JG) connection kit for water supply Room temperature sensor (cable not supplied – requires 2 x 0.5mm²) Clamps, clips, fittings & fixings Note: This unit should be installed by a suitably qualified person and always tested for gas and electrical safety following installation. Specifications Manuals & Guides Customer Reviews (0) Truma is a German company manufacturing high quality leisure products for caravans, campervans, boats and motorhomes; specialising in heating, air conditioning and water systems Model: Combi 6E Energy sources: Liquified gas (propane or butane), 230V electric or combination LPG operating pressure: 30 mbar Rated heat output – gas mode: 2000W / 4000W / 6000W (selectable) Rated heat output – electric mode: 900W / 1800W (selectable) Rated heat output – mixed mode: 6900W max. Fuel consumption: 160-460 g/h Current draw @12V DC – water heating only: 0.5A max. Current draw @12V DC – water & air heating: 1.4 – 6.5A max. Quiescent current draw: approx. 1mA Current draw @230V AC: 3.9A (900W) / 7.8A (1800W) Air flow rate with 4 warm air outlets (free flowing): 287m³/hr max. Nominal battery system voltage: 12V DC Water capacity: 10L Water inlet/outlet pipe size: 10mm OD (suits 10mm JG Speedfit fittings) Pump pressure: 2.8bar max. System pressure: 4.5bar max. Heating time 15-60°C water heating only: approx. 23 mins Heating time 15-60°C water & blown air heating: approx. 80 mins Weight: 15.5kg Overall dimensions: 510 (L) x 450 (W) x 300 (H) mm Minimum installation space dimensions: 540 (L) x 500 (W) x 350 (H) mm (extra space required for supply connections) Protection rating: IP21 Model: iNet X Panel Display type: 4.3″ colour resistive touch Nominal system voltage: 12 VDC Operating voltage range: 8 – 16 VDC Power consumption: 1.5W Current draw: approx. 130mA Overall dims: 120.1 (W) x 96.7 (H) x 31 (D) mm Screen depth when mounted: 9mm Cable length: 4m Interfaces: TIN bus, CI bus, CAN bus Updatable: Yes, via the Truma iNet X app
